4/3C-THR Rubber lined Slurry Pump is widely used for transporting slurry with strong corrosion and high concentration for many industries such as metallurgy,mine,coal,electric power,building materials etc.The wet parts is 100%interchangeable with 4/3C-AH metal lined slurry pump.
Design Features:
√Bearing assembly:large diameter shaft with short overhang contributes to long bearing life.
√Liners:Easily replaceable liners are bolted,not glued to the casing for positive maintenance.
√Casing:Casing halves of cast or ductile iron provide high operating pressure capabilities.
√Impeller:Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
√Throatbush:Wear is reduced and maintenance simplified by the use of tapered.
4/3 C THR Rubber Lined Slurry Pump Performance Parameters:
|
Model
|
Max. Power
(kw)
|
Materials
|
Clear water performance
|
Impeller
Vane No.
|
|
Liner
|
Impeller
|
Capacity Q
(m3/h)
|
Head H
(m)
|
Speed n
(rpm)
|
Eff. η
(%)
|
NPSH
(m)
|
|
4/3C-AHR
|
30
|
Rubber
|
Rubber
|
79.2-180
|
5-34.5
|
800-1800
|
59
|
3-5
|
5
|
Rubber Lined Slurry Pumps Applications:
Rubber lined slurry pumps are widely used for wet crushers,SAG mill discharge,ball mill discharge,rod mill discharge,Ni acid slurry,coarse sand,coarse tailings,phosphate matrix,minerals concentrate,heavy media,dredging,bottom/fly ash,lime grinding,oil sands,mineral sands,fine tailings,phosphoric acid,coal,flotation,sugar beets,process chemical,pulp and paper,FGD,waste water etc.
Note:
4/3 C THR rubber lined slurry pumps and parts are only interchangeable with Warman®4/3 C THR rubber lined slurry pumps and parts.